Construction Cement, Mortar and Concrete

We offer a wide variety cement, mortar and concrete for different types of masonry construction needs. Ready to mix (just add water) bags of concrete and mortar mix are available, as well as Portland Grey and other types of cements for making your own concrete, mortar and stucco mixes. Shown below are the most common types of construction cement, mortar and concrete that we stock, consult us for your masonry needs.

 

Concrete Mix

Concrete Mix can be used for building or repairing foundation walls, sidewalks, curbs, steps and ramps and for setting posts. This mix designed for pouring concrete 2 in. thick or more. QUIKRETE 80 lb. Concrete Mix consists of a uniformly blended, properly proportioned mixture of gravel, sand and Portland cement.

Concrete Mix High Early Strength

High Early Strength Concrete Mix consists of a commercial grade blend of Portland cement, sand, gravel. This concrete mix is designed for applications requiring high early strength and rapid strength gains. Perfect for commercial applications at least 2 in. thick: footings, foundations, driveways, and patios. Reaches 2500 PSI strength in 3 days and 5000 PSI strength in 28 days.

Fast-Setting Concrete Mix

Fast Setting Concrete Mix is used for setting posts, sleeves and anchors, for pouring slabs 2 in. (51 mm) or thicker, and for other applications where a fast-setting general purpose concrete is desirable. Fast setting concrete mix is a general purpose concrete designed to achieve final set in 20-40 minutes. Fast setting concrete mix suitable for setting posts and pouring slabs when a rapid return to service is desired.

Mortar Mix

Mortar Mix consists of a uniformly blended mixture of fine sand and Type N masonry cement and can be used for laying brick, block or stone. It can be used for above grade and non-load bearing work with brick, stone and block. Mortar Mix is the perfect mix for your everyday masonry projects such as constructing concrete block and brick walls, as well as setting stone walls.

Sand/Topping Mix

Sand/Topping Mix features a uniformly blended mixture of Portland cement, graded sand and other approved ingredients. This mix is ideal for repairing and topping damaged concrete surfaces that are less than 2" thick. It can be applied down to a 1/4" thickness and still maintain the strength needed for traffic areas. Use as a base for laying flagstone and paving bricks. Suitable for repairing and topping damaged concrete surfaces less than 2 in. thick

Masonry Cement

Type N Masonry Cement is used to make non-structural mortar. When mixed with sand this cement makes a great mortar for general purpose applications. Type N Masonry Cement should be blended with three parts sand for a standard mortar mix. Type N Masonry Cement not suitable for making concrete mixes of any kind. Usually recommended on exterior and above-grade walls that are exposed to severe weather and high heat.

0ortland Cement

0ortland Cement Type I is a high strength cement designed for a number of different applications. It can be mixed with aggregate to make base-coat stucco, concrete and mortar. 0ortland Cement Type I is a commercial grade cement that can handle any number of heavy applications; including structural construction and repair. Mix with all purpose gravel, lime and sand to make concrete mix, or just mix with sand and lime to make stuccos and mortars.